Appliance . net» hammer drill recall

Recall: Robert Bosch Tool Corp. Bosch Hammer Drills Due to Electrical Shock Hazard

NightOwl — Wed, 24 Nov 2010 16:08:22 +0000

Name of Product: Bosch hammer drills

Units: About 20,000 units

Importer: Robert Bosch Tool Corporation, of Mt. Prospect, Illinois

Hazard: The models have a grounding system and trigger switch that could cause ground wire abrasion and/or ground connector failure posing a shock hazard. In addition, the switch trigger could become stuck in the “on” position posing an injury hazard to the user.

Incidents: None

Description: Bosch 1/2 inch 2-Speed Hammer Drill with model number HD19-2, HD19-2D, HD19-2L and 1/2 inch 2-Speed Hammer Drills with model number HD 21-2 are included in this recall. “BOSCH” is printed in red lettering on the side of the drills.

Sold at: Home improvement, hardware and major retailers nationwide and various distributors from September 2009 through August 2010 for between about $140 and $220.

Manufactured in: Switzerland

Remedy: Consumers should immediately stop using the hammer drill and return hammer drill to Robert Bosch Tool Corporation for repair.

Consumer Contact: For additional information, contact Bosch toll-free at (866) 244-2110 between 7 a.m. and 7 p.m. CT Monday through Friday or visit the firm’s website at www.Boschtools.com

Recall: Robert Bosch Tool Corp. Hammer Drills Due to Risk of Injury

NightOwl — Fri, 13 Jun 2008 00:31:20 +0000

Name of Product: Bosch Hammer Drills

Units: About 9,700

Manufacturer: Robert Bosch Tool Corp., of Mount Prospect, Ill.

Hazard: The drill can continue to operate after the trigger has been released, posing a risk of injury to consumers.

Incidents/Injuries: None reported.

Description: The recalled hammer drill is blue with “BOSCH” printed on the side. The model number 1191VSR can be located on the product nameplate mounted on the side of the motor. The product’s packaging will be marked as 1191VSRK (the “K” indicates that the hammer drill was packaged with a case in a kit). Only drills with a serial number that begins with “7” are included in the recall.

Sold at: Menards and other hardware retailers and industrial distributors nationwide from July 2007 through April 2008 for about $100.

Manufactured in: Malaysia

Remedy: Consumers should stop using the recalled hammer drill immediately and contact the firm for a free repair.

Consumer Contact: For additional information, contact the Robert Bosch Tool Corp. toll-free at (877) 472-0007 between 7 a.m. and 7 p.m. CT Monday through Friday, or visit the firm’s Web site at www.boschtools.com