Comments on: Repair

By: Greg Behling

Greg Behling — Tue, 13 Dec 2011 21:08:04 +0000

Where can I purchase a replacement motor for Sunbeam MMA I assume it would be better than rebuilding the original.
Thanx

By: satish

satish — Sat, 26 Nov 2011 16:08:00 +0000

Preethi Eco plus mixie stops while grinding. Note that its not due to overload. it runs fine for 15 to 30 secs and stops. even when run without load.

Is there anybody can help near rochester hills,MI. Or any clues to repair myself.

By: Neil Miller

Neil Miller — Tue, 13 Sep 2011 17:23:01 +0000

I have a Kenmore Oasis washer and for the several months I have been getting this problem where the washer will stop working and it will beep. The code is not always the same. I stop it move the laundry around, then turn on. If it does it again, then I turn it off and run the rinse and dry cycle to finish the load, because it usually stopped during the rinse cycle. Lately it has started stopping earlier and the last couple days it stopped running all together it will stop running after 5 minutes. It had to have the computer controls replaced in less than a year of owning, but now it’s out of warrenty. I probably pushed off a problem and it got worse, but I’m not sure where to start. I don’t want to pay hundreds of dollars to get it fixed. I am fairly handy with fixing things, but I need somewhere to start.

By: shubha

shubha — Wed, 20 Jul 2011 19:51:30 +0000

Hi,
Ibought panasonic mixie MXAC300 with three jars from India.After 3 month of use it stop working pl tell me what can i do?

By: altlini334

altlini334 — Mon, 18 Apr 2011 21:21:01 +0000

Atlanta Appliance, AC and Heating Repair
We are open 24 hours a day 7 days a week. We provide Major Appliance Repair, Air Conditioning/ Heating Repair, Refrigerator Repair, Washer Repair, Dryer Repair, Oven Repair, Stove Repair, Dishwasher Repair and Disposal Repair. We operate in entire Atlanta and our service call is free with the repair.

Call toll Free: 800 465-0352

http://www.Appliancerepairserviceatlanta.com

By: Linda B

Linda B — Tue, 12 Apr 2011 22:49:31 +0000

Kevin, that was the hardest part to figure out for me with my kenmore, lol. Try slipping a putty knife on each side (maybe top or side, depending on yours), there’s a little clip you can push in that way.

By: Kevin

Kevin — Tue, 12 Apr 2011 00:12:27 +0000

HELP,

I’m pretty sure my heating element died on my Samsung front load electric dryer but I can’t figure out how to take the shell of the dryer off. I have all the screws on the outside off and it won’t budge

By: servicetech

servicetech — Tue, 01 Mar 2011 20:00:23 +0000

George Lee–On most of the bottom mount Frigs you remove the bottom drawer and the motor is at the back, behind a cover. GE has had some issues on their motors, most of them will run very slow. They are DC powered and most of what I have come across it is in the control board. GE has recomended replacing the motor and the board together. The control board is mounted on the back of the unit [behind a cover] Northstar is built by Elmira Stove Works 519-669-1281, 800-295-8498. Hope this helps

By: George Lee

George Lee — Tue, 01 Mar 2011 15:27:53 +0000

HELP! I have a Northstar nostalgic retro refrigerator. I love it; it’s really cool (well, not now because it stopped running). I just had the SEARS guy out and he just shook his head and left.
(So much for their motto “we fix any appliance”.)
Anyway it’s really a GE TRU-Cool bottom freezer with the nostalgic shell on the outside. I am pretty sure its the evaporator fan motor.
How do I get into this thing; the motors not in the back.
GBA-18ZBMAWW MA 31498 IV; TYPE DR18 CAMCO INC.
It was made in Canada to further add to the challenge.
Anybody out there with some advice?? Thanks, George

By: john hernndez

john hernndez — Wed, 23 Feb 2011 18:29:15 +0000

need to find an authorized cuisinart repair shop in the palmdale / lancaster, ca., area…the plastic shaft on my processor broke > 11tm model. thanx

By: Latha

Latha — Wed, 09 Feb 2011 22:54:38 +0000

Hi,
I got Indian Preeti Mixie, just used only once.
Reset button is not working, could you please send any technician details in San Diego
Thanks.

By: sushil kumar

sushil kumar — Sat, 05 Feb 2011 14:41:52 +0000

sir,I had a kenstar LF 2008 washing machine.its motor is not running. service macanic says that company cannot supply its spare and it is not possible to repair it. please send me its circuit diagram at my e mail so that it will be repaired.